Apple Watch Magnetic Charging Cable

My brother pointed out to me that Windows detects the Apple Watch charging cable when you plug it in. Of course, I was curious, so I used USBView to take a look at the device. Apple apparently has a PCI Vendor ID of [0x05AC] (Apple Computer), which is pretty cool!

Complete output from USBView:

Device Descriptor:
bcdUSB:             0x0200
bDeviceClass:         0x00
bDeviceSubClass:      0x00
bDeviceProtocol:      0x00
bMaxPacketSize0:      0x40 (64)
idVendor:           0x05AC (Apple Computer)
idProduct:          0x1392
bcdDevice:          0x0200
iManufacturer:        0x01
0x0409: "Apple Inc."
iProduct:             0x02
0x0409: "Apple Watch Magnetic Charging Cable"
iSerialNumber:        0x03
0x0409: "DLC5357021XGTCMAH"
bNumConfigurations:   0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed:     Full
Device Address:       0x06
Open Pipes:              1

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0040 (64)
bInterval:            0x32

Configuration Descriptor:
wTotalLength:       0x0022
bNumInterfaces:       0x01
bConfigurationValue:  0x01
iConfiguration:       0x00
bmAttributes:         0x80 (Bus Powered )
MaxPower:             0xFA (500 Ma)

Interface Descriptor:
bInterfaceNumber:     0x00
bAlternateSetting:    0x00
bNumEndpoints:        0x01
bInterfaceClass:      0x03 (HID)
bInterfaceSubClass:   0x00
bInterfaceProtocol:   0x00
iInterface:           0x05
0x0409: "HID Interface"

HID Descriptor:
bcdHID:             0x0111
bCountryCode:         0x00
bNumDescriptors:      0x01
bDescriptorType:      0x22
wDescriptorLength:  0x0021

Endpoint Descriptor:
bEndpointAddress:     0x81  IN
Transfer Type:   Interrupt
wMaxPacketSize:     0x0040 (64)
bInterval:            0x32